|
CUSTOMER'S RESPONSIBILITIES:
Install, level and anchor the equipment according to drawings provided by L&L.
Do any foundation work necessary (there are no pits required.)
Assemble furnace broken down for shipping purposes.
Hook up all utilities including atmospheres, compressed air, water and electric power according to drawings provided by L&L.
Interconnect power wires from the control panel to the furnace. (All wires have been run at our factory and tested and are all marked.)
Any metallurgical or process testing is the complete responsibility of the customer.
L&L'S RESPONSIBILITIES:
Check out and leak test the atmosphere system.
Inspect the customer's assembly of the furnace. L&L will direct the customer in making any necessary changes or will correct on its own at L&L's discretion.
Go over and repair any refractory cracks.
Check tightness of elements.
Start up equipment.
Adjust SCR if included. Instruct customer's personnel in how to do this.
Train operator in the use of the control systems. This will include a review of all programming parameters that affect the operation of this equipment.
Review the furnace manual. Operation and maintenance will be gone over.
Test for proper operation of all components and systems.
Start, watch and run the bakeout cycle.
START UP NOTES
At L&L's discretion, this may be accomplished in one or more separate trips. It will be done in a timely manner and will be given priority in our scheduling. All travel and lodging expenses will be paid for by L&L. This is a technically sophisticated piece of equipment. Qualified technicians must be provided by the customer to learn the set up, maintenance and operating functions. A qualified electrician, who will later be available for servicing the equipment, must be on hand to go over the control and electrical system and learn how to do all electrical set up functions. Customer must insure that the proper personnel are given ample time to review all instruction material prior to L&L's arrival and to review the system with L&L's technician. L&L will not be responsible for improper operation of the equipment or call backs if this note is not heeded to our satisfaction.
|
